Warhead Industries Brushless CNC Airsoft AEG Motor High Speed 36K RPM Short Shaft

Description

Warhead Industries are Pioneers in Airsoft motor technologies. The new brushless CNC Aluminium motor was designed from the ground up with the highest specification in mind. A complete set of new moulds including stator were used to product the best AEG motor in the industry.

This motor works with all current ETU's, MOSFET's and standard mechanical trigger contacts. A recommended upgrade for any Airsofter who wants to increase rate of fire, responsiveness, reliability and make battery charge last longer.

Brushless DC motors have no brushes to get worn out, which represents a huge leap forward in technology. Brushless motors output significantly higher efficiency and performance, and have a lower susceptibility to mechanical wear than their brushed counterparts.

The accelerated wear and tear due to constant contact of the brushes and the energy generated as heat means that brushed motors are expected to break down much sooner than brushless motors. It is generally not recommended to operate a brushed motors for longer than several minutes continuously. Without a chance to cool down, heat build up in brushed motors can easily compromise the integrity of its coils or brushes. Although in brushless motors there is still some heat generation due to air friction, this is kept at a manageable level. Brushless motors can typically run from 30 minutes to and hour continuously with no problems.

Brushless motors offer several other advantages:

  • Higher torque to weight ratio
  • Increased torque per watt of power input
  • Increased reliability and lower maintenance requirements
  • Reduced operational and mechanical noise
  • Reduced heat
  • Longer lifespan (no brush and commutator erosion
  • Elimination of ionizing sparks from the commutator (ESD)
  • Near elimination of electromagnetic interference (EMI)

Technical specifications:

  • High quality 7075 Aluminium casing
  • Built in on-board ESC with low voltage cut-off and over current draw to protect batteries (same type of function as MOSFET's and ETU's have)
  • Highest quality removable pinion gear for easy replacement
  • Totally custom in-runner design with maximum power and torque
  • High temperature resistant quality copper windings
  • High quality magnets
  • CNC back plate casing covering ESC
  • Operating voltage 7.4v - 11.1v (LiPo)

Red or green Loctite is advised by Warhead Industries when installing pinion gear.

Delivery

UK Deliveries

DESTINATION DELIVERY TIMES COST
Royal Mail Tracked 48 2-3 Working Days including Saturdays £4.50
Royal Mail Tracked 24 1-2 Working Days including Saturdays £5.50
DHL Mainland UK 1 Working Day excluding Saturdays £9.99

All aimed delivery times apply to items in stock. Orders placed after 12:00 will be dispatched the following working day, next day delivery does not include Saturday's or Sunday's. Some services are only available to UK mainland addresses.

Royal Mail services cover the following: Highlands, Islands, Scilly Isles and Isle of Man

Royal Mail 24 & 48 services are non insured services with delivery confirmation only, no tracking.

 

European Deliveries

We can ship to any European destinations. Simply choose your country and the correct price will show up in the basket. If we don't have your country setup on our website, please contact us via email to get a tailored shipping quote - Contact Us

Due to Brexit ruling, all goods shipped to Europe are now excluding taxes. You will likely incur your local tax rate plus a possible courier handling fee. Failure to pay customs charges could result in storage/returns charges.

Delivery times range from 2-4 days, 4-9 for remote areas.

 

Rest of the World

We can ship anywhere in the world, rates depend on size and weight so please get in touch for a tailored shipping quote - Contact Us

All goods shipped to the rest of the world are excluding taxes. You will likely incur your local tax rate plus a possible courier handling fee. Failure to pay customs charges could result in storage/returns charges.

 

Returns

Our returns system is easy, you have the right to cancel an order up to 14 days, please check our full returns policy here.

Customer Reviews (0)

Be the first to Write a Review for this item!

Sale Price: £129.99
52,000 RPM
36,000 RPM
30,000 RPM
In stock | usually dispatched in 24 Hours
Quick Code: WSS2
  • Brushless design for higher efficiency and performance
  • Increased overall reliablilty and lower maintenance
  • 7.4v LiPo: 25,000 RPM - 11.1v LiPo: 36,000 RPM
  • Significantly lower temperatures and less current draw from battery per shot
  • Easy "plug and play" installation - easiest AEG upgrade
Description

Warhead Industries are Pioneers in Airsoft motor technologies. The new brushless CNC Aluminium motor was designed from the ground up with the highest specification in mind. A complete set of new moulds including stator were used to product the best AEG motor in the industry.

This motor works with all current ETU's, MOSFET's and standard mechanical trigger contacts. A recommended upgrade for any Airsofter who wants to increase rate of fire, responsiveness, reliability and make battery charge last longer.

Brushless DC motors have no brushes to get worn out, which represents a huge leap forward in technology. Brushless motors output significantly higher efficiency and performance, and have a lower susceptibility to mechanical wear than their brushed counterparts.

The accelerated wear and tear due to constant contact of the brushes and the energy generated as heat means that brushed motors are expected to break down much sooner than brushless motors. It is generally not recommended to operate a brushed motors for longer than several minutes continuously. Without a chance to cool down, heat build up in brushed motors can easily compromise the integrity of its coils or brushes. Although in brushless motors there is still some heat generation due to air friction, this is kept at a manageable level. Brushless motors can typically run from 30 minutes to and hour continuously with no problems.

Brushless motors offer several other advantages:

  • Higher torque to weight ratio
  • Increased torque per watt of power input
  • Increased reliability and lower maintenance requirements
  • Reduced operational and mechanical noise
  • Reduced heat
  • Longer lifespan (no brush and commutator erosion
  • Elimination of ionizing sparks from the commutator (ESD)
  • Near elimination of electromagnetic interference (EMI)

Technical specifications:

  • High quality 7075 Aluminium casing
  • Built in on-board ESC with low voltage cut-off and over current draw to protect batteries (same type of function as MOSFET's and ETU's have)
  • Highest quality removable pinion gear for easy replacement
  • Totally custom in-runner design with maximum power and torque
  • High temperature resistant quality copper windings
  • High quality magnets
  • CNC back plate casing covering ESC
  • Operating voltage 7.4v - 11.1v (LiPo)

Red or green Loctite is advised by Warhead Industries when installing pinion gear.

Delivery

UK Deliveries

DESTINATION DELIVERY TIMES COST
Royal Mail Tracked 48 2-3 Working Days including Saturdays £4.50
Royal Mail Tracked 24 1-2 Working Days including Saturdays £5.50
DHL Mainland UK 1 Working Day excluding Saturdays £9.99

All aimed delivery times apply to items in stock. Orders placed after 12:00 will be dispatched the following working day, next day delivery does not include Saturday's or Sunday's. Some services are only available to UK mainland addresses.

Royal Mail services cover the following: Highlands, Islands, Scilly Isles and Isle of Man

Royal Mail 24 & 48 services are non insured services with delivery confirmation only, no tracking.

 

European Deliveries

We can ship to any European destinations. Simply choose your country and the correct price will show up in the basket. If we don't have your country setup on our website, please contact us via email to get a tailored shipping quote - Contact Us

Due to Brexit ruling, all goods shipped to Europe are now excluding taxes. You will likely incur your local tax rate plus a possible courier handling fee. Failure to pay customs charges could result in storage/returns charges.

Delivery times range from 2-4 days, 4-9 for remote areas.

 

Rest of the World

We can ship anywhere in the world, rates depend on size and weight so please get in touch for a tailored shipping quote - Contact Us

All goods shipped to the rest of the world are excluding taxes. You will likely incur your local tax rate plus a possible courier handling fee. Failure to pay customs charges could result in storage/returns charges.

 

Returns

Our returns system is easy, you have the right to cancel an order up to 14 days, please check our full returns policy here.

Customer Reviews (0)

Be the first to Write a Review for this item!